A solvent based acrylic solution primer for porous and chalky surfaces. To improve adhesion of subsequent coats of paint and also to form a barrier against alkali attack on subsequent coats.
Prominent Plaster Primer is available in the following sizes: 1lt , 5lt and 20lt
Appearance: Matt finish
Spreading Rate: 3 - 6 m²/litre depending on surface porosity and texture.
Solids: ±70% by mass and ±50% by volume.
Density: 1,38 kg/litre.
Recommended Dry Film Thickness: 25-30µm per coat minimum.
Viscosity: ± 80 Kµ
Flash Point: 43°C.
Available Sizes: 1Lt, 5Lt, 20Lt
Respecting The Environment:
Surface dry - 4 hours, Hard dry - 8 hours at 23°C.
Note: Higher temperatures will accelerate the drying times (approximately halved for every 10°C increase), whilst lower temperatures will retard the drying time (approximately doubled for every 10°C decrease).
Recoating time: 16 hours.
Requirements: One coat.
Gypsum board, hardboard:
Not recommended for redecorating - primer only.