A high quality acrylic based on a pure adhesion promoted emulsion which contains carefully selected pigments that make it possible to use on galvanised iron.
Prominent Galvanised Iron Primer is available in the following sizes: 1lt and 5lt
Appearance: Low sheen.
Spreading Rate: 8 m²/litre on galvanised iron depending on the surface texture.
Solids: ± 50% by mass and ± 44% by volume.
Density: 1,36 kg/litre.
Recommended Dry Film Thickness: 45 µm per coat minimum.
Viscosity: 95 Kµ.
Flash Point: Non-flammable.
Available Sizes: 1lt, 5lt
Respecting The Environment:
1 hour at 23°C.
Note: Higher temperatures will accelerate the drying times (approximately halved for every 10°C increase), whilst lower temperatures will retard the drying time (approximately doubled for every 10°C decrease).
Recoating time: 4 hours at 23°C.
Overcoating time: 24 hours at 23°C.
Requirements: 1-2 coats.
Non-rusted galvanised iron:
Rusted galvanised iron: