Appearance: Rough ripple texture.
Spreading Rate: 2-5m²/litre, dependent on surface texture, porosity and final ripple finish required.
Solids: 71% by mass and 53% by volume
Density: 1,56 kg/litre.
Recommended Dry Film Thickness: 2 coats at 85 µm per coat minimum.
Flash Point: Non-flammable.
Available Sizes: 5lt, 20lt
Respecting The Environment:
Note: Higher temperatures will accelerate the drying times (approximately halved for every 10°C increase), whilst lower temperatures will retard the drying time (approximately doubled for every 10°C decrease).
Recoating time: 8 hours at 23°C.
Requirements: Two coats.
Poor condition surfaces: